Output Description

DONE

Data_Type	Default_Value	Range	Unit
BOOL	-	TRUE / FALSE	-

Output DONE indicates the state of execution.

It has the value TRUE when the execution is finished and the outputs are valid. When DONE becomes FALSE other outputs are not valid any more.

ERR

Data_Type	Default_Value	Range	Unit
BOOL	-	TRUE / FALSE	-

Output ERR indicates whether an error occurred during Function Block execution.

It is only valid when DONE is TRUE. The kind of occurred error is specified by the error identifier at output ERNO.

ERNO

Data_Type	Default_Value	Range	Unit
WORD	-	0 … 65535	-

At output ERNO the identifier of an occurred error is provided. It is only valid when DONE and ERR is TRUE. (see, error messages): Error Messages of the Function Block Libraries

ACT_LEN

Data_Type	Default_Value	Range	Unit
WORD	-	-	-

ACT_LEN outputs the length of the received object data (in bytes), after the procedure has been completed successfully. Since Function Block execution requires bus access, the data are available in the next cycle after activating the Function Block at the earliest. The output value is only valid, if DONE = TRUE and ERR = FALSE.

PNIO_STATUS

Data_Type	Default_Value	Range	Unit
DWORD	-	-	-

Output PNIO_STATUS contains the PNIO ErrorCode and ErrorDecode.

PNIO_ADD_VAL1

Data_Type	Default_Value	Range	Unit
WORD	1	-	-

Output PNIO_ADD_VAL1 contains the PNIO ErrorCode1.

PNIO_ADD_VAL2

Data_Type	Default_Value	Range	Unit
WORD	2	-	-

PNIO_ADD_VAL2 contains the PNIO ErrorCode2.